<< Full range/other sizes
9750A – Stainless Steel Balls
Switch Measurements
9750A – Stainless Steel Balls
Flange Mounted Spring Loaded Heavy Duty Ball Transfer Unit
A | Body outside diameter | 4.719120 |
---|---|---|
B | Overall height ex. deflection | 5.468138.9 |
C | Flange thickness | 0.47212 |
D | Outside diameter with flange | 6.500165 |
E (PCD) | FIXING HOLES 'PCD' | 5.516140 |
F COUNTER-SUNK | Fixing hole diameter | 3 x 0.3983 x 10.1 |
SUPPORTS LOAD | 22001000 lbkg |
---|---|
DEFLECTION | 0.2406.1 ″ mm |
LOAD AT MAX DEFLECTION | 44092000 lbkg |
BALL ⌀ | 2.050.8 ″ mm |
WEIGHT | 26.45512 lbkg |
BALL ORIENTATION | Any angle |
SPRING LOADED | Yes |
Material Options | Solve specific application requirement by upgrading standard materials. | Corrosion
|
Contamination
|
Temperature
|
Radiation
|
|||||||||
Standard | AISI 52100 high chrome steel balls & Anti-Oxide electrophoretic coating of machined steel housing. Spring mechanism parts in carbon spring steel irrespective of material upgrade options below. | - | - | - | - | - | ||||||||
Stainless Steel Balls Upgrade: (AISI 440C) Anti-Oxide housing & load rating remain as standard. | ||||||||||||||
Arduous Conditions Upgrade: Stainless Steel AISI440 internal parts & balls. Anti-Oxide electrophoretic outer casing & carbon steel spring mechanism. Spring values & load ratings as standard. | ||||||||||||||
All Stainless Steel Upgrade: Stainless steel AISI304 housing. Balls & Internal parts AISI 440. Spring values & load ratings as standard. | ||||||||||||||
Phenolic Resin Ball Option: Minimise marking of delicate surfaces. Friction, wear & temperature properties change. Reduced load ratings indicated. |
|
Max Load: 8000kg Unaffected at any angle of orientation
Low Friction
1 : 0,005
High Shock
Resistence
Temperature -22/320°C
Speed
2m/sec
Factory
Refurbishment
Orientation ANY
Drain / Debris
Channels